PRODUCTS
MESSAGES
Nd:Ce:YAG - Neodymium, Cerium Co-doped Yttrium Aluminum Garnet
Keyword:
Nd:Ce:YAG - Neodymium, Cerium Co-doped Yttrium Aluminum Garnet
Category:
- Description
- Cas'Tech Class
- Parameters
-
Introduction
In double doped Nd:Ce:YAG crystals, Cerium are chosen as sensitizer for Nd3+ ions because of its strong absorption in UV spectral region at flash lamp pumping and efficient energy transfer to the Nd3+ excited state. As a result - thermal distortion in Nd:Ce:YAG is appreciably less and the output laser energy is greater than that in Nd:YAG at the same pumping. Therefore it is possible or realize high power lasers with good beam quality. Lasing wavelength at 1064 nm, laser damage threshold and thermal conductivity of the Nd:Ce:YAG crystals are the same as for Nd:YAG.
CASTECH's laser crystal Nd:Ce:YAG is featured by
• High efficiency
• Low threshold
• Good anti-violet radiation property
• Good thermal stability
• High optical qualityTable 1. Basic Properties Laser Transition 4I3/2→4I11/2 Laser Wavelength 1.064 µm Photon Energy 1.86×10-19 J @1.064 µm Emission Linewidth 4.5 Å @1.064 µm Emission Cross Section (Nd 1 at.%) 2.7~8.8 × 10-19 cm2 Fluorescence Lifetime (Nd 1 at.%) 230 µs Refractive Index 1.8197 @1.064 µm Table 2. Specifications Dopant Concentration Nd: 1.1~1.4 at.%, Ce: 0.05~0.1 at.% Rod Sizes Diameter: 3~6 mm, Length: 40~80 mm;
Upon request of customer
Dimensional Tolerances Diameter: ±0.1mm
Length: ±0.5 mm
Surface Quality (Scratch/Dig) 10/5 to MIL-PRF-13830B Wavefront Distortion λ/4 @633 nm Flatness λ/8 @633 nm Parallelism ≦30 arc sec Perpendicularity ≦15 arc min Chamfer ≦0.2 mm×45° AR Coating ≦0.2% @1064 nm Key words:- Nd:Ce:YAG
- flash lamp pumping
- energy transfer
- thermal distortion
- double doped
Previous page
Inquiry List